LilyGo T-Deck Plus Desktop Stand with 90 Degree USB-C Adapter, Meshtastic and MeshCore Node Holder

A stable desktop home for your LilyGo T-Deck Plus, built for Meshtastic and MeshCore operators.

If you have been running your T-Deck Plus flat on a desk, propped against a coffee mug, or fighting a USB-C cable that yanks out every time you pick the device up, this stand fixes all of that. It holds the device at a comfortable viewing angle for the Meshtastic UI and MeshCore firmware, keeps it steady during long mesh sessions, and includes a 90 degree USB-C adapter so the charging cable runs cleanly out the back instead of jutting downward.

Whether you are running a home Meshtastic node, testing MeshCore routing, or just want a tidy parking spot for the T-Deck Plus on the bench, this stand was designed by people who actually use these devices.

Made to order: every stand is printed and hand finished after you order. Plain stands print and ship in 3 to 5 business days, and a personalised faceplate adds about 1 extra day before dispatch.

🎯 Designed For

• LilyGo T-Deck Plus, with or without the external antenna mod
• Meshtastic firmware users, including the Fancy UI builds
• MeshCore firmware users
• Any T-Deck Plus running custom LoRa or mesh radio firmware
• Ham radio operators folding LoRa gear into the shack
• Hobbyists and developers working with ESP32-S3 and SX1262 hardware
• Field-test kits that need a stable home-base position between outings

✅ Features

✔ Optimized viewing angle, so you can read the screen and reach the trackball without hunching over the desk

✔ 90 degree USB-C adapter included, for clean cable routing with no bent connectors and no downward strain on the port

✔ Wide, low base, so the stand stays put when you press keys or lift the device out

✔ Open-back design, leaving full access to the SMA antenna port for external antenna upgrades

✔ Compact desk presence, at home on a cluttered ham shack bench, a lab table or a home office desk

✔ Personalised front faceplate, so your callsign or node name sits right on the stand

✏️ Personalize It

The front face plate can carry your callsign, node name, mesh handle or any short text you choose. Use the personalisation box on this listing and enter two things: the exact text you want, in the capitalisation you want it printed, and the font name shown in the font chart image. Keep the text short enough to fit across the faceplate; if it is too long to read well, we will message you before printing. Leave the box empty for a plain faceplate.

Want a specific colour combination or a fully custom variant? Message us through the shop, we work with the Meshtastic and MeshCore communities directly on small-batch designs.

📦 What's Included

• 1 x LilyGo T-Deck Plus Desktop Stand in the colour you select
• 1 x 90 degree USB-C adapter
• Personalised faceplate text, optional and free

The T-Deck Plus device shown in the photos is for demonstration only and is not included.

🛠️ Details

• Material: PLA, FDM printed
• Finish: clean matte surface, hand finished and inspected before shipping
• Finished size: 65.64 mm high x 77.0 mm wide x 47.8 mm deep (2.58 in x 3.03 in x 1.88 in)
• Colour: six colour choices, selectable in the options on this page
• Made to order in our workshop in Quebec, Canada

❓ FAQ

Q: Can I keep the device charging while it sits in the stand? A: Yes. The included 90 degree USB-C adapter turns the cable at the port so it exits toward the back of the stand rather than pressing into the desk. The stand itself has no electronics, it simply routes the cable you already use.

Q: Will it work with an external antenna mod? A: Yes. The back is left open so the SMA port stays reachable and an external antenna can be fitted with the device seated in the stand.

Q: How do I clean it? A: Wipe it with a dry or slightly damp soft cloth. Skip alcohol, acetone and other solvents, and do not put it in a dishwasher, as heat and harsh cleaners can mark the surface.

Q: Can I leave it on a sunny window sill or in a hot car? A: Better not. The material softens with sustained heat and can distort in a closed car or in long direct sunlight, so keep the stand on a normal indoor desk out of hot direct sun.

Q: What if it arrives damaged? A: Message us with a photo of the piece and the packaging and we will arrange a reprint or a refund.

⚠️ Please Note

Each stand is printed to order, so fine layer lines are visible on the surface. That texture is a normal characteristic of the process, not a defect, and colour may vary slightly between filament batches. This is an independently designed compatible accessory: it is not affiliated with, endorsed by or produced by LilyGo, Meshtastic or MeshCore.

Have a look through our mesh and radio accessories for stands and enclosures built for other Meshtastic, MMDVM and hotspot devices.